·          Industrial discharge luminaire generally suitable for mounting heights of greater  than 3.5m.

·          High frequency ballast.

·          Bi-level dimming function.

·          Programmable economy mode.

·          High purity aluminium reflector.

·          Robust steel body and gear tray construction.

·          Multiple fixing arrangements.

·          Hinged lamp and gear tray for easy access.

·          Thermal cut out where required.

·          Lamp: 250W MBI (supplied) or 400W MBI

·          Dims: (HxLxW) 170x600x320mm.

WHITE WEIGHT: 1.6KG DIMS(HWD): 520 X 105 X 70MM TWO PIN AND EARTH MANUFACTURED TO CONFORM WITH CURRENT UK SAFETY REGULATIONS - CE MARKED GUARANTEE SIMPLE PLUG IN OPERATION

Festoon 100M light string. BC cap. 3M spacing. 33 Holders. 110V. Lamps not supplied, maximum 25w if subject to rainfall 

PORTABLE HALOGEN WORK LIGHT LAMP, CAST ALUMINUM. 500W HALOGEN LIGHT SUPPLIED. PRE-WIRED WITH PLUG. COLOUR BLACK. IP44. Dims: (HxW) 230mmx180mm.

 

Brush less single phase motor

• Peak power: 720W
• Rated power: 650W
• Speed: 3000rpm
• AC rated voltage: 230V
• AC rated current: 2.8A
• AC frequency: 50Hz.
• Rated power factor: 1.0.
• Overload circuit breaker.
• 4.5 litre fuel tank
• 1 year warranty.
  

1000VA-1 110 VOLTS FOR POWER TOOLS AND LIGHTING STRINGS. TOOL RATING DOUBLE WOUND WITH A SECONDARY WINDING OF 110V CENTRE TAPPED EARTH 16A SOCKET. CARRY HANDLE

4WJBCP Junction box outlet unit. Fitted four sockets and carry handle.

High illumination general inspection and/or emergency light. Impossible to knock over. Impact resistance ABS base and polycarbonate dome, withstands drops and kicks. 3m cable and 13A (240V) or 16A (110V) plug.

The KT64 Multifunction Tester makes ‘ease of use’ it’s top priority with such features as:- A single rotary dial to make your test selection. Non trip loop circuits with Anti Trip Technology (ATT). Slim probe with test button as well as a lockdown option on the instrument for the most convenient hands free testing. The complete package is as important as the easy to use functions - the KT64 comes with a lid, convenient neck strap, a soft carry case with additional room to carry other testing tools and the new ‘super robust’ Kewtech G7 test leads (fused and GS38 compliant). All designed to protect the instrument and make testing as easy as possible. The KT64 caters for all the essential testing requirements of BS7671 (16th edition) in Industrial, commercial and domestic (part P) properties.

 

• Single selector dial .

• Hands free probe

• Easy to use

• No tripping of RCDs during loop impedance tests

• Test button in probe as well as lockdown test button for ‘hands free’ testing

• Easy PFC & PSC measurement without the need to alter test probes

• Additional LED for warning of high voltage output in insulation test mode

• Selectable touch voltage

• Backlit display

• Auto-test for RCD testing with all results shown on one screen, so no scrolling

• Conducts phase to phase loop tests

• End of line calibration certificate included

• Can be used with rechargeable batteries

 

Voltage Measurement

 

To save on having to carry an additional voltage detector the KT64 has a dedicated function for voltage detection.

 

Continuity Measurement

 

The test current exceeds 200mA as required for BS7671 and range selection is automatic. Continuous testing can be carried out by use of the test button lockdown feature. A selectable buzzer gives instantaneous indication of continuity.

Easy to use lead null facility eliminates the test lead resistance from the results, the nulled value is retained even if the instrument is switched off. Live circuit warnings are given by a

flashing LED, buzzer and indication on the main display.

 

Insulation Measurement

The KT64 has three selectable voltages, 250V for low voltage systems, 500V and 1000V. An auto-discharge function ensures that circuits are not hazardous after testing. A red LED gives warning of high voltage output during testing and discharging of the circuit. In case of connecting to a live circuit, a live circuit warning is given by flashing LED, buzzer and indication on the display.

 

Loop Impedance Measurement

 

A patented (ATT) low current loop impedance test enables high accuracy loop measurements and quick (7s) testing without tripping RCD’s.

 

A high current alternative is selectable for even higher accuracy and instantaneous results. This option is easily selectable and the subsequent test will default to the low current test, this saves any inadvertent tripping of the RCD. Polarity indication, supply voltage and frequency values are constantly displayed. The KT64 allows for phase to phase loop tests, again with an easily selectable option.

 

PSC / PFC Measurement

A separate dial position for PSC and PFC measurements with clearly marked selections makes this function easy and PSC can be taken after loop measurements without changing test leads.

Again the function has low and high test current options with the default to low current to avoid inadvertent tripping of RCDs.

 

RCD Measurement

The KT64 has a comprehensive RCD test feature:

• Suitable for RCDs rated at between 10mA and 1A

• Tests at 0˚ and 180˚ phase angle

• Measures at ½ x, 1x and 5x nominal tripping current with easily selectable options.

• Tests time delay RCDs (Selective) often found in TT systems

• Ramp test – identifies RCDs susceptible to nuisance tripping and identifies circuits with earth leakage problems.

• Auto-test – enables complete testing of a 30mA RCD (6 tests) while the operator simply stands by and resets the RCD. All the results are displayed on one screen – no need to scroll.

• Tests DC sensitive (type A) RCDs

• Touch current can be selected for 25V or 50V depending on application.

 

The KT64 comes complete with everything you need for BS7671 (16th Edition Testing).

A full set of new ‘G7’ fused test leads that includes a slim probe with continuity

The KT71 is aimed at users of manual Pat testers and also offers the added convenience of automatic test sequences – it couldn’t be simpler. A single position on the rotary dial indicates the type of test, for instance a Class I for IT equipment – it couldn’t be easier. The start button starts the sequence and LEDs will indicate the state of each test. Green for pass and red for fail – it couldn’t be more straightforward. The actual test result is also displayed for recording.

Class I IT equipment test Safely tests IT equipment, performs the sequence of an earth bond test at 200mA, followed by a check to see whether the user has not forgotten to switch the instrument on, then an insulation test. The insulation test has a 250V or 500V option and the test sequence also has an option whether a leakage current test is done instead of the insulation test. This corresponds to the IEE Code of Practice which supports a leakage test where insulation tests cannot be safely conducted.

 

Class I 20A test

Performs the sequence of an earth bond test at 20A, followed by a check to see whether the user has not forgotten to switch the instrument on, then an insulation test. The insulation test has a 250V or 500V option and the test sequence has an alternative of a leakage current test instead of the insulation test. This corresponds to the IEE Code of Practice which supports a leakage test where insulation tests cannot be safely conducted

or are suspect.

 

Class II test

The class II sequence tests whether the appliance is switched on and then runs an insulation test. A leakage current test (touch current test) can be conducted as an alternative.

 

Leakage Current (touch current) test

The Leakage Current Test is conducted at mains voltage, a load test and a leakage test is undertaken and the results are shown alternately on the screen. (Testing at mains voltage gives superior results than Instruments that perform this by subsequent leakage tests)

 

Extension Lead test

Tests Earth Continuity with 20A test current, insulation and polarity. An extension lead adapter comes with the KT71.

 

FEATURES

• Performs Earth bond at 200mA for IT appliances and high current at 20A for all other appliances

• 250V / 500V insulation test voltages

• Run / leakage test

• Single rotary dial position initiates test sequence

- Class I IT 200mA Earth Bond

- Class I 20A Earth Bond

- Class II

- Extension lead test – including polarity

• LED indication of pass / fail as well as a result display

• Automatic check if appliance is switched on or not.

• Tests 110V appliances for earth bond and insulation (with appropriate test adaptor).

• Tests in accordance with the IET (IEE) Code of Practice

• Press start

• Check LED’s and log result

• Plug in appliance

Everything you need

The KT71 comes ready to use with a strap and a lid that slides off and is conveniently stored on the underside of the instrument. A mains lead, test lead and extension lead adaptor are also included for 230V testing. The lead set is stored in a pouch which is attached to the strap of the instrument, conveniently keeping everything together.

 

• Select test

This KT71 makes PAT Testing easy and safe:

In house maintenance staff who conduct their own yearly PAT testing and Electrical contractors who need to have a Pat testing capability but for whom it is not core to their business can easily be trained to use this instrument with complete safety. LED indicators give visual pass/fail indication with limits set in accordance with the IET (IEE) code of practice. This means that, in most cases, unskilled users will not have to interpret the results.

When switching to live testing (In leakage current mode) audible warnings are given that the appliance is about to come live. A double button press is also required to safeguard against inadvertent switching on of an appliance.

KT73 – plus Portable

Appliance Tester

• Earth bond 100mA/10A/26A

• Earth bond null

• 110V/230V appliances

• Fuse test and check

• Earth leakage

• Insulation test 250/500V DC

• Load test

 

Accessories

 

Mains Lead

• Earth lead

• Instruction manual

• Certificate of Conformity

KT75 Portable Appliance Tester

• Downloadable PAT

• Earth bond 100mA/10A/26A

• Earth bond null

• 110V/230V appliances

• Ten pre-programmed Auto tests

• Fuse test and check

• Earth leakage

• Flash test

• Insulation test 250/500V DC

• Load test

• 30 day demo software CD

 

Accessories

 

Mains Lead

• Earth lead

• Instruction manual

• Certificate of Conformity

• 30 day demo software CD

8w Maintained 3 hour emergency bulkhead

• IP65 - Suitable for external use
• Tough polycarbonate diffuser
• Hinged gear tray and captive fixing screws for easy installation
• Universal self adhesive legend pack included
• BS4533/EN 60598-2-22
• Facility for remote switching
• Facility for non-maintained mode
• Size: L345 x D75mm x H120mm

Eden is an attractive weatherproof IP65 LED luminarie complete with Maintained emergency mode.

The Eden body is manufactured in white flame retardant ABS with a polycarbonate diffuser. Eden's polycarbonate diffuser incorporates a Fresnel lens, ensuring excellent light distribution.

To aid rapid installation, the Eden is fitted with a hinged gear tray and has side and rear entry points moulded into the base.

The Eden is available with a number of options including semi-recessing kits and self adhesive edit legends.

Dimensions Luminaries: Length 350mm x Width 108mm x Depth 80mm

Dimensions (Semi-Recess Cut Out): Length 330mm x Width 90mm

Anglolite is an attractive, fully recessed emergency luminaire available in a range of finishes. The Anglolite features a robust galvanised rear body which recesses fully into the ceiling and only requires a ceiling depth of 90mm. Within the fitting a hinged, removable gear tray facilitates easy fixing and maintenance and a front trim plate with a diffuser ensures a neat and attractive finish.

Standard models are supplied with a prismatic polycarbonate diffuser but can be supplied with opal if preferred. The opal diffuser is suitable for fitting a self-adhesive legend kit or can be screen-printed where a compact, fully recessed exit sign is required.

 

A version with 11 watt PLS lamp is available for use as a rectangular downlight mains luminaire.

 

Specification - Enclosure: Galvanised steel

Fascia Plate: Sheet steel plate in white stove enamel or brass or chrome lacquered finish Diffuser: Polycarbonate Charger:

Constant current with red LED for mains healthy and connected battery

Batteries: 2 x 4AH Nickel Cadmium

Lamps: 8 Watt T5 Fluorescent or 11 watt TC-S compact Fluorescent

Dimensions: Luminaire: Length 410mm x Width 155mm x Depth 90mm

Cut-Out: Length 325mm x Width 130mm (85mm Minimum Ceiling Void)

Viewing Distance 18 Metres (With Opal Diffuser and SAL1)  

 

Other options on request: