• Floor level lighting which allows for a dazzling range of lighting effects.
• They can be installed in wooden floors, decking, paving, stair skirting, concrete and typically used as marker lights for pathways or entrances, wall washing, uplighting columns or archways and mood lighting in any room in the house including wet rooms and pool areas.
• The fittings stay cool and are safe to walk on.
• 38mm diameter cut out is required for paver fitting.
• Lightsource needs to be located near 2x13A power outlets.
• Separate power feed to colourwheel to allow for continuous colour change or static colour.
• Kit includes: 100W tungsten halogen lightsource, Colour wheel, 4x48mm stainless steel fittings, 4 x fibre optic tails (1m - 4m) and full installation instructions.

IP68 1w luxeon LED walkover light, Pre-wired with 3m rubberised cable, Submersible to a depth of 2m, 5mm toughened glass, 30 lux at 1m (white LED), Diameter: 60mm, Depth: 39mm, Hole Size required: 50mm.

Viewing angle: 45 degrees, Stainless Steel marine grade 316, 12v sealed for life, Must be wired in series, Requires an LED driver (we recommend LL348 - runs up to 16 fittings). Multi Application - Groundlight - Downlight - Docklight - Decklight - Steplight

Die cast aluminium body. Toughened glass diffuser. Suitable for use in damp or underwater applications to around 1m depth. Must be used with a suitable low voltage transformer (LL162). Dims: (HxWxL) 230mmx215mmx172mm. Lamp: 12V 50W MR16 supplied.

·          IP68 Subemersible 1W 316 stainless steel LED marker light. ROHS - Compliant   

·          Screw threaded body with silicon seals and hexagonal lock-nut allows fitting in bath tubs, showertrays, jacuzzi’s, etc (consult a bathroom specialist for professional installation advice)

·         Mounting surface thickness - Min. 2mm, Max 12mm.  Class 3 Equipment.  Suitable for direct mounting on normally flammable surfaces

·         Submersible to a depth of 2m.   Cut Out Dia. 26 mm.   Overerall Dia. 30mm edge to edge mm.  Glass Dia 20 mm.  Recess Depth  26 mm. 

·         NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·         Cool operating temperature. Input Voltage 350mA V

·          Fitted with 1m of cable for connection to a Constant Current LED driver (N.B. to be wired in SERIES)

·          Non-dimmable.  Driver supports up to 9 fittings.

Cut Out Dia. 112 mm.  Overall Dia. 126 mm. Base Dia. 122 mm. Recess Depth. 70 mm. Input. Suitable for direct mounting on normally flammable surfaces.

·          IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

·          Integrated LED driver - no separate driver required

·          Satin silver cast aluminium faceplate

·          NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal  for inaccessible locations

·          Cool operating temperature

·          White, Blue, Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

·          Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

·          Non-dimmable

·          N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cut Out Dia. 112 mm. Base Dia 122 mm. Recess Depth  70 mm. width 126 mm. Height 126 mm. Double Insulated. Suitable for direct mounting on normally flammable surfaces.    

·          IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

·          Integrated LED driver - no separate driver required

·          Satin silver cast aluminium faceplate

·          NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·          Cool operating temperature

·          White, Blue,Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

·          Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

·          Non-dimmable

·          N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cut Out Dia.  77 x 117 mm.  Base Dimensions  140H x 95W mm.  Recess Depth   100 mm.  Width   90 mm.  Height  135 mm. Double Insulated. Suitable for direct mounting on normally flammable surfaces        

·          IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

·          Integrated LED driver - no separate driver required

·          Satin silver cast aluminium faceplate

·          NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·          Cool operating temperature

·          White, Blue,Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

·          Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

·          Non-dimmable

·          N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cut Out Dia.  120 x 122 mm.  Base Dimensions  140H x 140W mm.  Recess Depth  100 mm.  Width 135 mm.  Height  135 mm.  Double Insulated. Suitable for direct mounting on normally flammable surfaces

·          IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

·          Integrated LED driver - no separate controller required

·          Satin silver cast aluminium faceplate

·          NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·          Cool operating temperature

·          White, Blue,Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

·          Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

·          Non-dimmable

·          N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cut Out Dia:70 mm. Overall Dia:73 mm. Base Dia:69 mm. Recess Depth:60 mm. Projection:28 mm. Must be earthed. Suitable for direct mounting on normally flammable surfaces.       

·          IP65 Mains voltage LED step light suitable for step and low level lighting

·          Integrated LED driver - no separate driver required

·          Aluminium body

·          Fitted with 30cm mains cable

·          Product availaible with White, Blue, Green, Red and Orange LED's

·          Non-dimmable

·          N.B. Cut-out 58mm without mounting sleeve. 62mm with mounting sleeve

For flower beds, outside wall or to illuminate shrubs. For wall mounting or ground spike. Includes spike. Waterproof IP67 rated. 230v Die cast aluminium body. Borosilicate toughened glass. Mains powered.  Lamp either mains 50w GU10 halogen or 18 LED low energy lamp. Dia. 98mm. Depth 105mm. Complete with 2m of lead.  Rear dia. 75mm if inset to Decking.

For flower beds, outside wall or to small/medium sized shrubs. For wall mounting or ground spike. Includes spike. Waterproof IP67 rated. 230v Die cast aluminium black body. Borosilicate toughened glass. Mains powered.  Built-in BRIGHT 28 LED, 45 degree flood. Dia. 98mm. Depth 105mm. Complete with 2m of lead.

COLOUR CHANGING using remote control LL297.  High powered 5w MR16 LED Lamp. Low Energy. Long Life. Ideal for Domestic or Commercial Installations.  BEAM ANGLE: 60 degrees. INPUT POWER: 100-240V AC 50/60Hz. No UV or IR radiation. Over 20,000 hours. Diameter:49.7mm Length:46mm. DRIVER REQUIRED: LL405

SIMULTANEOUS COLOUR CHANGING using remote control LL297. These new MR16 intelligent lamps introduce a colour changing scheme to any installation.  Install a single master lamp and up to thirty two slaves.  Point the remote control (LL297) at the master lamp and change the colour of the master and slaves simultaneously.  Four different colour changing scenes with all of the lamps changing smoothly through the colour spectrum.  Watch them strobe, flash or fade at the same time!

Adjust the light intensity to four different levels.  Press one of the sixteen different colour buttons and instantly change the mood of your environment.  Built in wiring looms attached to each lamp.  Ideal for bars, restaurants, night clubs, stores, commercial premises, and looks great in domestic homes.

Length 52mm Diameter 50mm.   5w Cree LED.  Colour changing MR16
Beam angle 60º .  4 colour changing programs
2 fl