Distributors of Quality Electrical Products at Lowest Prices

• Open fronted contemporary fire with concealed 2kW fan heater
• Flame effect can be used independently of heat
• Fan heater with choice of 1kW and 2kW heat settings
• For use wall-mounted or inset
• Thermostat
• Choice of Optiflame® Elite log effect and Optiflame® white pebbles (both supplied)
• Black glass front 
• Dimensions H620mm W700mm D152mm
• Opening requirements for recessed installation H600mm x W400mm x D145mm

• Contemporary fire designed for use either wall-mounted or recessed
• 2kW fan heater with a choice of 1kW and 2kW heat settings
• Finished in silver grey with a reversible frame finished in gloss black and gloss white
• Remote control
• Thermostat
• Optiflame® log effect 
• Dimensions H621mm W750mm D183mm 
• Opening requirements for recessed installation H580mm x W580mm x D130mm

• Glass fronted contemporary fire with concealed 2kW fan heater.
• Flame effect can be used independantly of heat.
• Fan heater with choice of 1kW and 2kW heat settings.
• For use wall-mounted or inset.
• Thermostat.
• Unique Optiflame® log effect.
• Dark grey frame with black front.
• Remote control
• Dark grey frame with black front
• Dimensions: Height: 600mm.  Width:696mm.  Total Depth:183mm
• Opening requirements for recessed installation H580mm x W580mm x D130mm

• A sleek, contemporary flame effect fire designed for wall mounting.
• Remote control giving armchair selection of on/off, heat output and flame effect light levels.
• Choice of Optiflame® Elite log and Optiflame® white pebbles (both supplied).
• Finished in black.
• Fully concealed 2kW fan heater with remote control and manual switching.
• Choice of 1kW and 2kW heat settings.
• Flame effect can be used independently of heat source.
• Wall mounted only (cannot be recessed).
• Power consumption effect only 140 Watts.
•  Dimensions H605mm x W700mm x D154mm

Wall mounted TFT display unit in landscape format, Compact flash card with choice of audio visual playback of 8 different continuous-loop moving scenes

-the four seasons

-a roaring log fire

-a cosy coal fire

-a dying embers log fire

-a soothing aquarium

In-built speakers, Fully functional remote control giving scene selection, volume control and heat on/off operation, Finished in black with contrasting chrome effect trim, Heated glass enhances realism of fire scenes, 19" for LVA191, WXGA 16:9 aspect ratio TFT display in landscape format, 1GB compact flash card with video footage, 8 ohm speaker set, Remote handset and manual control, Adjustable sound level, Wall mounting only, 1.2kW fan heater

Dimensions: Height: 440mm  Width: 690mm  Total Depth: 70mm

• This stunning design acts as a modern, circle shaped mirror then at the touch of the hand-held remote control turns into a high-tech electric fire with choice of moving scenes
• Wall mounted TFT display unit in round mirror format
• Compact flash card with choice of audio visual playback of 8 different continuous-loop moving scenes all with matching soundtrack:
• The four seasons, a roaring log fire, a cosy coal fire, a dying embers log fire, a soothing aquarium
• In-built speakers
• Fully functional remote control giving scene selection, volume control and heat on/off operation
• Mirror finish
• Twin fan heaters with total output of 1.1kw
• Dimensions: D7000mm x D75mm

• Traditional 'cast iron' style stove in matt black finish.
• Unique Optiflame® coal effect with real coals.
• Choice of 1kW or 2kW fan heat settings.
• Remote control on/off
• Flame effect can be used independently of heat source.
• Fan heater
• Height: 545mm Width: 440mm Depth: 310mm

• Cast-iron style stove finished in black.
• Choice of unique Optiflameflame effect with real coals and Optiflame log flame effect.
• 1kW or 2kW heat selection.
• Opening door. 
• Thermostat control
• Remote control giving armchair selection of on/off heat output and flame effect light levels.
• Optional stove pipe accessory DX08.
• Dimensions: 665mm(H) x 540mm(W) x 375mm(D).

• Compact stove designed to fit in or on a standard fireplace and hearth
• Optiflame® log effect
• 1kW or 2kW fan heat selection
• Black cast effect finish
• Remote control of on/off
• Compatible with hearth pad accessory HPD001
• Flame effect can be used independently of heat source
• Height: 547mm Width: 440mm Depth: 295mm  

•  Freestanding and fits flat to wall
• Real coals and white pebbles supplied.
• Chrome and satin silver effect.
• 2kW fan heater with choice of 2 heat settings.
• Power consumption effect only 130 Watts.
• Approximate dimensions H665mm, W603mm, D226mm. 

• Designed to fit "flat to wall"; no inset depth required.
• Black and brass effect finish.
• 2kW fan heater with choice of 2 heat settings.
• Compatible with hearth pad accessory HPD001.
• Power consumption effect only 130 Watts
• Approximate dimensions 682mm(H), 639mm(W), 194mm(D)

• Maximum heat output 2kw with a concealed fan heater under the canopy
• 1kW, 2kW and flame only setting independent of heat
• Remote control as standard
• Thermostat as standard
• Low energy LED flame effect
• Real Coal fuel effect
• Black & Brass effect finish
• Designed to fit "flat to the wall", no inset depth required
• Freestanding depth of 194mm

• A freestanding fire with black and chrome effect finish.

• Unique Optiflame® effect.
• Freestanding and fits flat to wall.
• Real coals and white pebbles supplied.
• Black and chrome effect finish.
• 2kW fan heater with choice of 2 heat settings.
• Power consumption effect only 130 Watts.
• Approximate dimensions H665mm, W603mm, D226mm.

• Freestanding fire with Optiflame® effect.
• Supplied with white pebbles and real coals.
• Fits flat-to-wall; no insert depth required.
• 2kW fan heater with 2 heat settings.
• Flame effect can be used independently of heat.
• Black and chrome effect finish.
• Height: 665mm Width: 603mm  Depth: 226mm

• An inset fire that fits standard 18" fireplace openings
• Chassis allows the fire to be fully inset with minimal projection into the room where flue allows.
• Unique OptiflamePlus® effect
• Real coals for added authenticity
• 2kW of heat gently circulated from the fan heater hidden within the canopy
• 1 or 2kW heat output plus thermostat control
• Controls concealed under the canopy, which hinges forward for ease of use
• Brass effect trim and front 
• Inset depth of only 55mm or flat to wall using spacer provided. 

• Dimensions H620mm W518mm D170mm

• Inset fire with unique Optiflame® effect
• One piece solid cast metal grate and front
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Choice of 1kW or 2kW fan heat settings
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room.
• Supplied with both pebbles and coal as standard
• Can be flat wall fixed using 55mm spacer provided 
• Dimensions: H635mm x W516mm x D185mm

• Fits standard 16" and 18" fireplaces.
• Optiflame coal effect, with real coal, can be operated without heat.
• 2KW fan heater with a choice of 1KW or 2KW settings.
• Inset depth of only 550mm. 
• Can be flat wall fixed using spacer provided 
• H620mm * W520mm * D155mm.

• Fits standard 16" and 18" fireplace openings and all conventional flues.
• Chassis allows the fire to be full inset where flue allows.
• Real coals.
• 2kW fan heater with choice of 2 heat setting plus thermostat control.
• Brass effect with black.
• Inset depth of only 55mm using spacer provided.
• Flame effect can be used independently of heat source.
• Dimensions: H63.7 x W52.1 x D24.7cm

• An inset fire that fits standard 18" fireplace openings and all conventional flues.
• Chassis allows the fire to be fully inset with minimal projection into the room where flue allows or flat to wall using spacer provided.  
• Unique Optiflame® effect
• Real coals for added authenticity
• 2kW of heat gently circulated from the fan heater hidden within the canopy
• 1 or 2kW heat output plus thermostat control
• Controls concealed under the canopy, which hinges forward for ease of use
• Brass or Chrome effect trim with black

• Dimensions H618mm W526mm D165mm

• Stainless steel effect with chrome effect details ad polished cast fret
• 2kW fan heater with choice of heat settings
• Thermostat
• Flame effect can be used independently of heat
• Inset depth of just 55mm fully inset or can be used flat-to-wall using spacer provided
• Optiflame® effect with coal and white pebbles 
• Dimensions H617mm W520mm D180mm

• An inset fire that fits standard 18" fireplace openings
• Chassis allows the fire to be fully inset with minimal projection into the room where flue allows or flat to wall using spacer provided. 
• Unique OptiflamePlus® effect
• Real coals for added authenticity
• 2kW of heat gently circulated from the fan heater hidden within the canopy
• 1 or 2kW heat output plus thermostat control
• Controls concealed under the canopy, which hinges forward for ease of use 
• Can be flat wall fixed using optional spacer DX28
• Dimensions H621mm W521mm D170mm 

• Inset fire with unique Optiflame® effect
• Stainless steel with brass effect trim
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Choice of 1kW or 2kW fan heat settings
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room. 55mm needed
• Can be flat wall fixed using supplied spacer   
• Comes with both pebbles and coal
• Dimensions: H617mm x W520mm x D162mm

• A stylish canopy free standing fire finished in black or silver.

• Canopy free fire - no protrusion from fan heater.
• 1.5kW inset fire with unique Optiflame® Plus effect.
• Electronic thermostatic control giving highly accurate room temperature control.
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Fits flat-to-wall with 70mm spacer (included).
• Black finish.
• Manual or remote control giving armchair selection of on/off.
• Coal and small white pebbles supplied as standard.
• Power consumption effect only 130 Watts
• Approximate dimensions 582mm(H), 519mm(W), 198mm(D)

Traditional freestanding fire Flickering log effect Black and brass effect 2kW radiant heat with 1kW / 2kW heat selection. Effect can be used independently of heat source Power consumption effect only = 60 watts

• The Dimplex Lyndhurst has a stylish black canopy
• Flickering flame log effect
• 2kW of radiant heat with 'Economiser' control
• 0.7kW of thermostatically controlled convected heat
• Choice of heat settings

• Freestanding or wall-mounted.
• Attractive cherry finish surround.
• 2kW of radiant heat with `Economiser` control.
• Flickering flame coal effect.
• Choice of heat settings.
• Power consumption effect only 120 Watts
• Approximate dimensions 540mm(H), 775mm(W) 215mm(D)