0001

 

Collingwood is committed to delivering leading technology, high quality lighting and associated products which meet the highest possible technical standards, and that ensure safety, reliability, and value for money for the user. To achieve this, the Company relies on the personal commitment, experience, and skills of everyone in the organization working within a management system which satisfies all of the relevant requirements.
!

Mains 3w LED ground light. IP67

15053
!

The short body (51mm) of this eyelid fitting makes install easy, and with the top and shield being one single piece of marine 316 grade stainless steel it’s incredibly robust too. The latest generation of LED chip is incorporated giving unparalleled performance, along with massive life expectancy and minimum maintenance.  Dimensions – Dia 98mm x 51mm. 300mm cable length.

LED Beam angle: 45°

Material Top: Stainless steel 316

Material Body: Aluminium

Cable: 300mm 3core cable

Glass Temp: 44°C

Wiring: Parallel

Cut out: 80mm

LED 3w Walk Over Low profile ground light. IP68 Submersible

15054
!

This the most powerful LED ground light from this manufacturer so far, three high power LED's combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with it's robust stainless steel construction, this fitting will remain looking great for years to come. A low profile design and simple wing springs ensure installation is quick and easy.

 

  • Dimensions – Dia 75mm x Depth 43mm. Must be wired in series.
  • Needs driver 15075.
  • Can be used with sleeve 15123.
  • IP Rating: IP68 @ 1bar (9m of water)
  • Material: Stainless steel (316)
  • Beam angle: Flood 50°, Spot 12°
  • LED Output; 3watts @ 350mA
  • Cable: 1m H05RN-F rubber cable

LED 9w LED Walk Over ground light. IP68 Submersible

15056
!

This ground light may look elegant and understated, but it’s light output is greater than a 35w dichroic. The new LED technology contained inside produces more than twice the light output of its competent predecessor, 2150 Lux at 1m. The body is marine grade stainless steel and the glass is toughened 5mm. Also with the added benefit of being IP68 meaning it can be fully submersed.

 

  • Dimensions – Dia 75mm x Depth 97mm.
  • Cable length – 3m. Must be wired in series.
  • Needs driver 15076.
  • Can be used with sleeve 15123. 
  • Input: 700mA driver  
  • IP Rating: IP68 @ 2m
  • LED Output: 9watt Max.
  • LED Beam angle: 45° Flood; 12° Spot
  • Material: Stainless steel 316
  • Cable: 3m 2core cable
  • Glass Temp: 55°C
  • Wiring: Series
  • Hole size: 65mm

LED 3w Walk Over Square ground light. IP68 Submersible.

15057
!

Three power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the fitting will remain looking great for many years to come. A low profile design and simple wing springs ensure installation is quick and easy.

·             Dimensions – 75mm square x Depth 43mm.

·             3m cable length.

·             Needs driver 15075.

·             Can be used with sleeve 15123.

·             Input: 350mA driver

·             IP Rating: IP68@2m

·             LED Output: 3watt @ 350mA

·             LED Beam angle: 45° Flood ; 12° Spot

·             Material : Stainless steel 316

·             Cable: 3m 2core cable

·             Glass Temp: 55°C

·             Wiring: Series

·             Hole size: 65mm 

LED 3w Walk Over Ground light with frosted glass. IP68 Submersible

15058
!

Three power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the fitting will remain looking great for many years to come. A low profile design and simple wing springs ensure installation is quick and easy.

·             Dimensions – 75mm square x Depth 43mm.

·             3m cable length.

·             Needs driver 15075.

·             Can be used with sleeve 15123.

·             Input: 350mA driver

·             IP Rating: IP68 @ 2m

·             LED Output: 3watt

·             Material : Stainless steel 316

·             Cable: 3m 2core cable

·             Glass Temp: 55°C

·             Wiring: Series

  • Hole size: 65mm 

LED 3w RGB Walk Over Ground Light. IP68 Submersible

15059
!

The most powerful LED groundlight from this supplier so far. Three colour change power LED's combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with it's robust stainless steel construction, this fitting will remain looking great for many years to come. A low profile and simple wing springs ensure installation is quick and easy.

  • Dimensions – 75mm x Depth 43mm.
  • 1m cable length.
  • Needs RGBOX part number 15122.
  • Can be used with sleeve 15123.
  • IP Rating:IP68 @ 1bar
  • LED Input: 350mA
  • LED beam angle: 45°
  • LED output: 3watt
  • Material: Stainless steel 316
  • Wiring: Series
  • Cable: 3m 4core cable
  • Cutout: 65mm

LED 6.7w LED Walkover Ground Light. IP68 Submersible

15060
!

Elegance and performance, designed to deliver both. Three powerful LED's provide a strong light, while the special lens creates a classy lighting effect that is easy on the eye. Position along paths, in lobbies or flowerbeds for the professional look.

  • Dimensions – 75mm x Depth 43mm.
  • 1m cable length.
  • Needs RGBOX part number 15122.
  • Can be used with sleeve 15123.
  • IP Rating; IP68 @ 1BAR
  • LED Output: 6.7watt @ 350mA
  • Input: 350mA RGB driver (1 x 15122 x 4 15060 RGB fittings)
  • Material: Stainless steel 316
  • Wiring: Series
  • Glass: Toughened walk over frosted glass
  • Cable: 2 x 3m 4-core 0.75mm
  • Cut out size: 65mm
  • Temperature: 44°C

9 watt RGB LED Ground Light. IP68 Submersible

15061
!

Colour change power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the 15061 will remain looking great for many years to come. A low profile and simple wing springs ensure installation is quick and easy. Dimensions – 75mm x Depth 97mm. 3m cable length. Need RGBOX part number 15122. Can be used with sleeve 15123.

IP Rating: IP68 @ 2m

Input: 350ma RGB Driver part number 15122

LED Output: 9watt MAX.

LED Beam angle: 45°

Material : Stainless steel 316

Cable: 2 x 3m 4core cable

Glass Temp: 32°C

Wiring: Series

Hole size: 65mm

1 watt LED Path Marker Ground Light. IP68 Submersible

15062
!

This exclusive, robust yet attractive, mid-sized, LED slot light is ideal for path, lobby and deck lighting. The light exits via 30° slots giving precise light output where you want it, and eliminates glare where you don’t. Inexpensive to run and with up to 100,000 hours of LED life, ensures a maintenance free product and makes this fitting great value for money. With ‘cool touch’ for added safety. Dimensions – 60mm x Depth 39mm. 3m cable length. Need driver 15075.

 

IP rating: IP68 @ 9m

Temperature rating: 37°C

Wiring: Series

Material: Marine grade (316) stainless steel

Fixed cable: 3m H05RN-F rubber cable attached

1 watt LED Cast Stainless Steel Path Marker. IP68 Submersible

15063
!

This exclusive, robust yet attractive, mid-sized, LED slot light is ideal for path, lobby and deck lighting. The light exits via 30° slots giving precise light output where you want it, and eliminates glare where you don’t. Inexpensive to run and with up to 100,000 hours of LED life, ensures a maintenance free product and makes this great value for money. With ‘cool touch’ for added safety. Dimensions – 60mm Square x Depth 39mm. 3m cable length. Need driver 15075.

 

IP Rating: IP68 @ 1bar

Input: 350mA

Output: 1watt

Cable: 3m

Wiring: Series

Cut out: 50mm

Square - Low profile ground light with 1w Luxeon LED. IP68 Submersible

15064
!

This exclusive, robust yet attractive, mid-sized (60mm) LED light is ideal for path, lobby and deck lighting. Inexpensive to run and with up to 100,000 hours of LED life, ensure a maintenance free product and makes this great value for money. With cool glass for added safety. Dimensions – 60mm Square x Depth 39mm. 3m cable length. Need driver 15075. Can be used with sleeve 15124.

Beam angle: 45°

Material: Marine grade (316) stainless steel

Glass: 5mm toughened walkover glass

Cable supplied: 3m H05RN-F rubber cable attached

Cut-out: 50-55mm x 40mm

Low Profile Ground Light. IP68 Submersible

15065
!

This exclusive, robust yet attractive, mid-sized (60mm diameter) LED light is ideal for path, lobby and deck lighting, inexpensive to run and with up to 100,000 hours of LED life, ensures a maintenance free product and makes the 15065 great value for money. With cool glass for added safety. Dimensions – 60mm x Depth 39mm. 3m cable length. Need driver 15075. Can be used with sleeve 15124.


LED output : 1watt @ 350mA

IP Rating : IP68 @ 1bar (9m)

Cable : 3m H05RN-F rubber cable

Glass : 5mm toughened walkover glass

Material : 15065 - Marine grade(316)stainless steel, 15065AB - Antique Brass

Beam angle : 45°

Cutout size : 50-55mm x 40mm

Sealed for life units

Low Profile Ground Lights with 1w Luxeon LEDs. IP68 Submersible

15066
!

Discreet yet powerful, this Luxeon LED powered ground light is perfect for dance floors, decking areas, entrance halls and pathways. Indoors or out, the IP68 marine grade stainless steel unit will give a flawless performance for many years of maintenance free operation. Available with a flood or a spot beam angle, means this fitting is suitable for any application. With cool glass for added safety. Dimensions:  40mm Dia x 35mm Depth x 1m cable length. Need driver 15075.

 

IP Rating: IP68 @ 1bar (9m of water)

Beam angle: Flood 45°, Spot 12°

Material: Marine grade (316) stainless steel

Glass: 5mm toughened walkover glass

LED input: 350mA

LED Output: 1watt @ 350mA

Cable: 1m 0.35mm red and black teflon cable

Wiring: Series

Cutout: 31-35mm

Also available as kit including 5 fittings, 15075 driver, x20 connectors and 100m 0.35mm² Teflon cable

Multi pack for 15066

15066-1
!

Low Profile Ground Lights With 1w Luxeon LEDs. IP68 Submersible

15067
!

Discreet yet powerful, this Luxeon LED powered ground light is perfect for dance floors, decking areas, entrance halls and pathways. Either indoors or outdoors, the IP68 marine grade stainless steel unit will give a flawless performance for many years of maintenance free operation. Dimensions: 40mm dia x 36mm depth x 1m cable length. Need driver 15075.

 

Beam angle : 45°

Material : Marine grade (316) stainless steel

Glass : 5mm toughened walkover glass

Cable supplied : 1m 0.35mm Teflon cable

Cut out : 31-35mm

Buried Uplighter with RGB LED. IP67

15073
!

Real power without the hassle of ongoing maintenance. At last, a high quality in-ground fitting that requires zero lamp changing. The powerful 9w Luxeon LED technology inside means it’s perfect for a large scale effects. Also the adjustability of the light angle means it’s great for lighting trees, buildings, statues and driveways.  Dimensions 185mm dia x 120mm cut out x 225mm depth.  Sleeve dimensions 180mm x 245mm depth. Requires RGBOX part number 15122.

 

LED beam angle: 45° Flood Lens

Power supply : Requires part number 15122

Flying Lead: 2 x 5m 4 x 0.75mm (4 core cable) Plus cable marked at gland and end of cable

Maximum static load: 2000kg

Maximum drive over speed: 15mph

Material: Stainless steel cover ring

Glass: Drive over 10mm tempered glass

Body Material: Painted and pre-treated aluminium die cast base

Sleeve: Nylon installation sleeve

Cable diameter: cable size 6 - 12mm

Fully sealed PG 13.5 cable gland

Buried Uplighters With Twin LED RGB. IP67

15074
!

The ultimate LED Ground light! With 2 adjustable 9w Luxeon RGB LEDs units inside, this is probably the most powerful LED ground light in the world. Dimensions 220mm x 310mm depth x 150mm cut out.  Sleeve dimensions 212mm x 310mm depth. Requires RGBOX part number 15122.

 

Lighting: 2 x LED3 9w RGB

LED beam angle: 45° Flood Lens

IP Rating: IP67

Power supply : Requires part number 15122

Flying Lead: 5m 4 x 0.75mm (4 core cable) positive cable marked at gland and end of cable

Maximum static load: 2000kg

Maximum drive over speed: 15mph

Material: Stainless steel cover ring

Glass: 10mm tempered glass

Body Material: Painted and pre-treated aluminium die cast base

Product weight: 4.72kg

Single carton dims: 34x24x24cms

Sleeve: Nylon installation sleeve

Cable diameter: cable size 6 - 12mm fully sealed PG13.5 cable gland 

Brushed Aluminium 1w Square Downlight

15069
!

This classic LED mini light remains hugely popular, it has been installed everywhere from childrens’ bedroom ceilings to West End stages, from fashionable restaurants to old fashioned narrow boats. There really is no end to the applications suitable for this high powered mini LED. Featuring an incredibly simple plug and play system, even the largest of applications can be wired in minutes. Dimensions – 60mm square x 17mm depth. Need driver 15075.

 

IP Rating: IP20

LED output: 1watt @ 350mA

LED Input: 350mA

LED Beam angle: 15°

Material: Aluminium

Cable: 300mm 0.35 cable with fitted amp plug

Cut-out: 53mm

Suitable for plug and play with LED Lyte Extension

9 watt Floodlight

15072
!

Finally a real alternative to expensive, maintenance hungry LV and GU lamps. The awesome 9w LED3 unit fits into normal 50mm (MR16) downlight housing and provides similar light output to a 50watt GU10, but requires ZERO maintenance and runs at a fraction of the cost too. Requires either 700mA LED driver or 1000mA led driver. Dimensions 50mm diam x 69.25mm depth x 1.1m cable length. Requires driver 15076.

 

LED Input: 700mA

LED Output: 9watt max.

Material: Aluminium

LED Beam angle: 45°

Wiring: Series

Lamp size: MR16 (50mm) 

Fan light Decorative LED wall light

15068
!

This fitting really is something different. The hundreds of tiny fins produce large blades of light across walls and ceilings in dramatic fashion. Cutting edge technology in side emitting LED’s has allowed Collingwood to produce this stunning effect light! Dimensions – 90mm dia x 60mm depth.

 

IP Rating: IP20

Material: Aluminium

LED output: 1watt @ 350mA

Rated temperature: 35°

Input : 230-240v to intergral LED driver

Tilt Silver Fire Rated LED Downlight with Flood Lens. IP44 Zone 2

15071
!

The real deal! Finally a complete LED downlight unit that is ready to connect directly to mains, produces more lumens per watt than a 50w lamp, and meets all relevant building regulations. This great looking, top performing downlight uses a patented design to ensure exceptionally long life which is unachievable via the usual “can” design Fire protection method. That’s why we offer a 7 year extended warranty on every 15071.  Dimensions - 120mm diam x 94mm depth. Note: This product is not dimmable


Input: 230-240v AC mains

IP Rating: IP44

Material: Aluminium

Fire rating: 60 / 90mins

Tested to: BS EN 1365-2

Complies with Building regs:

Part B – Fire Safety. Part C – Contaminants and Moisture Protection.  Part L – Energy Conservation

Part P – electrical Safety.  Part E – Resistance to the passage of sound

Fixed Silver Aluminium Fire Rated LED Downlight With Flood Lens

15070
!

The real deal! Finally a complete LED downlight unit that is ready to connect directly to mains, produces more lumens per watt than a 50w lamp, and meets all building regulations. This great looking, top performing downlight uses a patented design to ensure exceptionally long life which is unachievable via the usual “can” design Fire protection method. That’s why we offer a 7 year extended warranty on every 15070. Dimensions – 91mm diam x 109mm depth.  Note: This product is not dimmable

 

Input: 230-240v AC mains

IP Rating: IP44

Material: Aluminium

Fire rating: 60/90mins

Tested to: BS EN 1365-2

Colours available: Natural white, and Warm White

Complies with Building regs:
Part B –Fire Safety, Part C – Contaminates and moisture protection,

Part L – Energy conservation. Part P – Electrical Safety.  Part E – Resistance to the passage of sound.

Colour Changing Box

15122
!

Collingwood Fittings:

Colour change is no longer a complicated procedure. RGBox makes it simple for large or small installations to achieve the desired effect. Simple RGB colour change controller.  Can be used with most 350mA RGB LED'S. Dimensions; L148mm x W75mm x D28mm

 

Max.load: 27watt - 9watt max per circuit (3 circuits)

Min. Load: 3watt - 1 x Red, 1 x Green, 1 x Blue

Output: 3 x 0.35A (350mA)

Input: 190-260v 0.15A

Material: Plastic housing

350mA constant current LED Driver with plug and play connection

15075
!

Collingwood Fittings:

Input: 110-240v ~ 50..60Hz 0.14A max.

Output: 350mA 35V cc 1-9watt Max.

Material: Plastic housing

Secondary Wiring: Plug and play connector

Protection against: Mains surge, Short circuit & over heating

Energy rating 'A'

Mains loop in loop out terminals

Dims: L111mm x W48mm x D28mm

700mA LED Driver

15076
!

Collingwood Fittings:

Mains input: 195-265v AC ~50 - 60Hz 0.2A

Output: 700mA - 36VCC

LED load: Min. 3 x 3watt ; Max. 9 x 3watt

Note: These LED Drivers are not dimmable

Use with:

Weight: 0.12kg

Dimensions: L138mm x W40mm x D28.5mm 

Tube 68 Sleeve

15123
!

Collingwood Fittings:

Material: Black anodised Aluminium

Top internal Diameter:68mm, top external Diameter:72mm
Bottom internal diameter:64mm
Length:150mm
For use with 15054 - 15061

Tube 50 Sleeve

15124
!

Collingwood Fittings:

Material: Black anodised Aluminium
Top internal Diameter:51mm, top external Diameter:56mm
Bottom internal diameter:48.5mm
Length:150mm
For use with 15065