Recessed Lighting Transformers and Accessories

Transformers and Accessories.  Electronic Transformers. LED Drivers. Low Voltage Transformers for LED lights

!

Transformer 60w Dimmable Electronic

15046
!
60W ELECTRONIC TRANSFORMER 230 / 12 VOLT. DOUBLE INSULATED DIMMABLE.  Size H21mm.  L120mm. W30mm.  Mains input cable 23mm. LV Output cable 24.5mm

TRANSFORMER 105w DIMMABLE ELECTRONIC

15194-0
15194
!
105W ELECTRONIC TRANSFORMER 230 / 12 VOLT 105W MAX DOUBLE INSULATED DIMMABLE WHITE.  Size H28mm x W39mm x L110mm. TO POWER 2 @ 50W, OR 3 @ 35W DICHROIC

TRANSFORMER 150w/250w DIMMABLE ELECTRONIC

15086
!

50-150w.  size H38mm. L214mm.  Colour black.

50-250w. Size H38mm.  L214mm.

Indoor LED Driver 350mA or 24v DC

15628
!

For use with all Marine Grade Fittings

  • Output stabilised
  • Short circuit protection
  • Thermal overload protection
  • 350mA DC will drive up to 8 x 1w fittings wired in series
  • Used with 15552 etc.

Fire & Acoustic Rated Metal Dry Lining Back Boxes

15486
!

1 gang and 2 gang boxes in both 35mm and 47mm depths. As simple to install as a standard cavity wall box.  No additional components to purchase or install.

 

Simple and quick to install saving time and money.

Unique spring loaded lugs.

Substantial amount of cable entries.

Earth terminal fitted.

 

With potential fire temperatures in excess of 1000 C, the use of metal in the FlameGuard design helps maintain its position within the wall until the wall loses its structural integrity. “The FlameGuard intumescent seal, when exposed to fire, forms a dense carbon char which separates and insulates the substrate from the heat of the fire. The expanded seal eliminates the flow of air through the void and thereby starves

the fire of vital elements for combustion.” The fire & sound integrity is not impaired

when the FlameGuard back boxes are installed back to back. FlameGuard back boxes have been tested and conform to both fire and acoustic BS EN standards Complies with Building Regulations. Part B (Fire Safety) Part E (Resistance to the Passage of Sound)

 

The intumescent layer within the box starts to expand at 190 degrees Celsius and continues to expand as the temperature increases filling the metal box cavity.

 

The spring loaded fixing lugs are retracted in preparation for box installation (Handles 7mm upwards). With the box in position the fixing lugs are released, locking the box in place in readiness for the installation of the appropriate accessory. The fire and acoustic integrity of the wall has now been restored.

Flameguard Insulation Support Boxes

15414
!