Distributors of Quality Electrical Products at Lowest Prices

Your on-line electrical products superstore on 01752 - 560759

Click Flameguard Downlights. Fire Rated Downlights. Insulation Boxes.

1) The Fire Rated system is a means of installing mains downlighters with integral fire and acoustic properties. All of these products have been independently tested and approved to meet the requirements of BS 476 Pt21 1987 and BS EN ISO 140-3 1995 also BS EN ISO 140-6 1998. They satisfy all relevant sections of current Building Regulations including part B and C of the building regs. Forget about costly and difficult to install fire hoods.

2) Flameguard downlights are fire tested to full 90 minute rating by chiltern international fire and approved to BS 476 Part 21 1987 with solid timber joists and also acoustically tested by the building test centre. With the nature of fire testing and the different sets of joists, do not take for granted that a down light tested in a solid timber constuction will maintain the same integrity within a construction using metal web or engineered 'I' beam joists. Fittings has been fire tested in floor constructions with these types of modern joists and is compliant for both 30 minute and 60 minutes to BS EN 1365:2000. Complies with Scottish Building regulations, sections 2, 3 and 5.

3) All down lights carry the 'F' Mark. Sutable for mounting into normally flammable material (eg Wood). Low Energy GU10 carries this mark when mounting into normally flammable material which may cover the down light. Complies with class 3 safety extra-low voltage (Selv) requirements of BS EN 60598. Flameguard fittings carry a 5 Years manufactuers warrantee (Not the lamp)

Pre-wired Click Flow for Flameguard Fittings

15735

GU10 Mains flameguard fittings will have this connector as an option

Low voltage flameguard fittings will have this connector also integral transformers as an option.

Mains GU10 Fixed Flameguard Downlight

15612

FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp.

Rim dia. 80mm Cut-out. 65mm Recess depth. 90mm.

Zenon available as exchange.

Mains or Low Voltage Cast Fire Rated Fixed Downlight

15442

Cutout 72mm. Rim dia. 88mm. complete with Radium (Osram) or BLV branded aluminium reflector lamp, rated 4500 Hours.

Mains Cast Fixed Flameguard Downlight Halogen or Low Energy

15615

For optimum product quality offering years of trouble free use with sparkling, long lasting decorative colour finishes there can be no substitute for the Professional range of die cast zinc fittings. The design is further enhanced by our unique ‘twist and stop’ lamp retaining ring, greatly facilitating lamp replacement and maintenance. Use mains GU10 for the brilliance and strength of their light output and low energy GU10 11W reflector lamp version where energy conservation and low running costs are the order of the day. Includes moisture seal.

Cut-Out 70mm. Diameter 88mm. Recess Depth 115mm

Mains GU10 Professional Cast Reflector Flameguard Downlight

15669

Designed to produce a broad beam of light by means of its extended reflector this fitting enables creative schemes to be produced utilising standard GU10 lamps. Includes 50w Standard halogen lamp. Zenon available as exchange. Includes moisture seal.

Rim diameter. 105mm, Cut-out diameter. 92mm, Recess depth. 100mm.

Mains GU10 Professional Cast Baffle Flameguard Downlight

15671

The ‘baffle’ beam reducer in this unique fitting creates a tight beam light output enabling the designer to create some very interesting lighting effects and schemes. Includes 50w halogen lamp. Zenon available as exchange. Includes moisture seal.

Rim diameter. 88mm, Cut-out diameter. 70mm, Recess depth. 115mm

Mains GU10 Low Energy Fire Rated Fixed Downlight

15451

Special Purchase

Part E compliant (acoustics)

Specially designed to aid compliance with Building Regulations Part B, E, F & L

Air permeability to 10 fittings m²

Not suitable for bathrooms

Body: Pressed Steel

Lamp: 1 x 11W GU10 CFLi included

Rim dia. 80mm Cut-out. 65mm Recess depth. 100mm.

Mains GU10 Low Energy Tilt Low Energy Fire Rated Downlight

15726

Die cast with 30 Degree tilt adjustment.
Complete with 11w Low energy lamp

Mains GU10 Fixed Low Energy Flameguard Downlight

15625

This fitting is designed exclusively for use with the low energy compact fluorescent GU10 lamp supplied and cannot be used with standard GU10 lamps. It therefore satisfies the requirement of Part L of the 2006 Building Regulations in relation to the installation of energy efficient luminaries. Includes 11w lamp. 6400k Bright white available as exchange.

Rim dia. 80mm Cut-out. 65mm Recess depth. 105mm.

Mains GU10 Adjustable Flameguard Downlight

15613

All FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Rim Dia. 92mm. Cut-out dia. 80mm. Recess depth. 100mm. Tilt. 15 degrees. Zenon available as exchange

Mains GU10 Cast Fire Rated Adjustable Downlight

15444

Cutout 84mm. Option for Radium (Osram) branded aluminium reflector lamp, rated 4500 Hours.

Mains GU10 Cast Adjustable Flameguard Downlight

15619

Adjustable through a single plane, the adjustable fitting can be positioned so as to highlight a topical display or lighting requirement. Utilising the ‘twist and stop’ lamp retaining ring. Zenon available as exchange. Includes moisture seal.

Cut-Out 88mm Diameter 102mm Recess Depth 110mm Tilt 15 degree

Mains GU10 Adjustable Square Flameguard Downlight

15401

All FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Square 102mm. Cut-out dia. 92mm. Recess depth. 100mm. Tilt. 20 degrees. Zenon available as exchange. Includes moisture seal.

Mains GU10 Cast Wallwash Flameguard Downlight

15499

The clever design of this fitting allows the installation of an apparently standard flush downlighter but provides the benefits and flexibility of an adjustable downlighter or wallwasher. By means of a very simple mechanical adjustment the angle and direction of the light source can be changed quickly and simply up to 30 degrees from the horizontal plane. Complete with 50w halogen lamp. Zenon available as exchange. Includes moisture seal.

Rim Dia. 110mm. Cut-Out Dia. 92mm. Recess Depth 100mm.

Mains GU10 Eyeball Cast Flameguard Downlight

15623

Small footprint eyeball cast downlight complete with moisture seal. Tilt 20 degrees. All FLAMEGUARD downlighters supplied complete with 50w GU10 aluminium reflector lamp. Rim dia: 102mm. Cut-out: 92mm. Recess depth:105mm. Zenon available as exchange. Includes moisture seal.

Mains GU10 Low Energy Fixed Flush Fitting Flameguard c/w Flow Connector

15631

A low energy fire rated downlight solution suitable for installation where recess depth is limited

Supplied complete with the Click Flow Fix Kit connector for ease of installation

Accepts up to 13w GX53 Lamps (Supplied)

Cut Out Dia 90mm. Recess Depth 52mm. Dia of fitting 106mm

Mains GU10 Low Energy Adjustable Flush Fitting Flameguard c/w Flow Connector

15632

A low energy fire rated downlight solution suitable for installation where recess depth is limited

Supplied complete with the Click Flow Fix Kit connector for ease of installation

Accepts up to 13w GX53 Lamps (Supplied)

Cut Out Dia 98mm. Recess Depth 62mm. Dia of fitting 117mm

Mains GU10 IP65 Shower Cast Fire Rated Fixed Downlight

15456

Cutout 72mm. Option for 35w aluminium reflector lamp or Megaman 11w Energy saving warm white (3000k) lamp rated 600,000 switching cycles.

Mains GU10 IP65 Shower Flameguard Downlight

15392

The IP65 rating of this fitting allows its use in Bathroom Zones 1 & 2 and the plated die cast bezels are used to not only provide an efficient seal against ingress of airborne particles, water or steam but also to furnish an attractive finish to the installation.

Rim dia. 88mm Cut-out. 75mm Recess depth. 115mm

Mains GU10 IP65 Shower Eyeball Tilt Cast Fire Rated Downlight

15530

Cutout 81mm. Diameter 87mm. Complete with 50w 3000 hours warm white halogen lamp or 11w low energy lamp. 30 degree tilt. Premium die-cast aluminium front rim for long lasting quality. Guaranteed 5 years. Simple and quick installation.

Low Voltage Fixed Flameguard Downlight

15609

All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim dia: 80mm. Cut-out: 65mm. Recess depth:80mm

Low Voltage Professional Cast Recessed Reflector Flameguard Downlight

15670

Designed to produce a broad beam of light by means of its extended reflector this fitting enables creative schemes to be produced.

All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim diameter. 105mm, Cut-out diameter. 92mm, Recess depth. 95mm. Includes moisture seal.

Low Voltage Professional Cast Recessed Baffle Flameguard Downlight

15672

The ‘baffle’ beam reducer in this unique fitting creates a tight beam light output enabling the designer to create some very interesting lighting effects and schemes

All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim diameter. 88mm, Cut-out diameter. 70mm, Recess depth. 100mm. Includes moisture seal.

Low Voltage Adjustable Flameguard Downlight

15610

All FLAMEGUARD downlighters supplied with 50w low voltage aluminium reflector lamp. Rim dia: 92mm. Cut-out: 80mm. Recess depth:90mm. Tilt. 15 degrees.