Low voltage downlights and shower rated downlights. Flameguard downlights. Wall wash Lights. Dimmable transformers.
50mm. Manufactured from pressed steel and finished with a high quality electrophoretic powder coating. Features ceramic lampholder, slicone cables, sprung lampholder contacts and lampholder retaining ring. Accepts 20w(B77), 35w(B78), 50w(B79) and colour (B20), MR16 GU5.3 (Not Supplied). Cut-out size: 60-67mm. Rim diameter: 80mm. Void depth: 125mm. Complies with the latest European harmonisation standards EN60598
50MM. Manufactured from pressed steel and finished with a high quality electrophoretic powder coating. Features ceramic lampholder, slicone cables, sprung lampholder contacts and lampholder retaining ring. Accepts 20w(B77), 35w(B78), 50w(B79) and colour (B20), MR16 GU5.3 (Not Supplied). Cut-out size: 75-82mm. Rim diameter: 95mm. Void depth: 125mm. Complies with the latest European harmonisation standards EN60598
LV downlighter. The Bullit fitting will appeal to those searching for a more modern style. The Bullit downlighter also provides an un-interrupted beam of light onto any surface at any angle to the fitting. Wallwash effects can therefore be achieved as well as conventional downlighting.
Diameter – 110mm, cut out – 102mm, recessed depth – 100mm, rotation – 355deg, tilt – 80deg.
Steel plate with powder coating. Designed for recessed wall or staircase mounting. Bars and Display areas. Any situation requiring discreet security or mood lighting. Front plate 75mm * 75mm. Cut-out diameter 68mm * 68mm. Depth 55mm. Lamp not supplied 12v 20w capsule halogen lamp BB12.
1-16w LED Driver. For 1w LED products. Supplied with fly leads for rapid connection. Short circuit protection. Overload protection. Input 100v-260v 50-60Hz. Output DC 12v 350mA max. Must be wired in series. Not dimmable.L:66mm W:36mm H:22mmL:111mm, W:48mm, H:29mm
All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim dia: 80mm. Cut-out: 65mm. Recess depth:80mm
Designed to produce a broad beam of light by means of its extended reflector this fitting enables creative schemes to be produced.
All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim diameter. 105mm, Cut-out diameter. 92mm, Recess depth. 95mm.
Available in Polished brass, polished chrome, satin chrome, white, satin brass and antique brass.
All FLAMEGUARD downlighters supplied with 50w low voltage aluminium reflector lamp. Rim dia: 92mm. Cut-out: 80mm. Recess depth:90mm. Tilt. 15 degrees.
All FLAMEGUARD downlighters supplied with 50w low voltage aluminium reflector lamp. Square: 102mm. Cut-out: 92mm. Recess depth:95mm. Tilt. 20 degrees.
The IP65 rating of this fitting allows its use in Bathroom Zones 1 & 2 and the plated die cast bezels are used to not only provide an efficient seal against ingress of airborne particles, water or steam but also to furnish an attractive finish to the installation.
Rim dia. 88mm Cut-out. 70mm Recess depth. 110mm.
For use with LL41, LL100, L121, LL20, LL10, L120.
NB: LL10 and LL20 are smaller bezels