Distributors of Quality Electrical Products at Lowest Prices

3 wire version, a neutral wire is needed. The time lag is adjustable from 2-20 minutes. Illuminated push button for easy location in the dark. Vandal resistant. Polycarbonate moulding. IP54 Waterproof rating.

Specification – 6AMP

Loading:                  up to 6 amps (1500W) of any type of load (including fluorescent lights and fans)

Dimensions (mm):    90 x 90 x 60

Specification – 16AMP

Loading:                  up to 16 amps (4000W) of lighting or heating loads

Dimensions (mm):    120 x 90 x 60

• Delay function from 2 sec - 2 hours reduces energy consumption
• Incandescent 10A max, fluorescent 6A max, compact fluorescent 3A max, low voltage 3A max
• Accurate time settings using dip switches and rotary adjuster
• Multi point switching
• ABS
• IP66, Grey finish
• Dimensions: W75mm x H110mm x D70mm

Plug-in electronic temperature controller incorporating a digital display of temperature. Can control to a temperature between 0ºC and 35ºC (heating only) and is ideal for controlling radiant, convector and fan heaters as well as oil filled radiators.

• Plug-in, no wiring.
• Mains operated, but integral battery power allows setting out of the mains socket.
• Precision digital temperature control.
• Permanent manual override for instant ON/OFF switching.
• Integral temperature sensor.
• 0ºC to 35ºC temperature range control.
• Temperature setting can be easily reviewed

• Easy to programme weekly electronic timer.
• Up to70 on/off switches per week and individual and daily on/off switches.
• AM/PM or 24 hour programming.
• Random on/off security feature.
• Reset button.
• Easy to read LCD display.
• Count down facility.
• Rechargeable battery back up

Features individual day, everyday, every weekday or weekend programme selections over a 7 day period. Six programmes are available, and if each one is selected to operate over all 7 days, 42 ON & OFF switching per week will result. For use with all convector and electronic panel heaters.

• Switched and switched/timed outputs.
• Simple two button programming.
• Manual override until next programme change.
• Integral double pole switch and BS1362 fuse.
• Shortest switching time 1 minute.
• 1000 hours rechargeable memory back up.

The RBT run back timer is a high output electronic timer which provides control for a wide range of loads. Its powerful 20A output makes it particularly suitable for the control of lighting, ventilation and heating. The unit allows an appliance to be powered for a set time period which can be adjusted by the user. A simple display shows the user how much time is left to run. An ON/OFF switch allows the user to cancel the timing program whilst a memory remembers the last timing sequence selected.

• 20 Amp rating at 230VAC (resistive)
• 6Amp rating at 230VAC (inductive)
• ON/OFF Switch for time cancellation
• Adjustable between 15min and 2hours
• ON/OFF Switch for time cancellation

The Electrisaver is a simple push button electronic timer that saves energy by remembering to switch off when you forget.

• Pays for itself in lower fuel bills, time and time again.
• Controls loads up to 3kW -including immersion heaters- in shops, offices, school, church halls and all around the home
• Perfect boiler override or extension timer for central heating systems anywhere
• Stylish, compact and simple to install.
• Flush or Surface mounting

Applications Include

• Immersion Heater Control
• Heated Mirrors
• Panel Heaters
• Towel Rails

 Set the time you need for the task in hand e.g. the ironing.  When the time runs out, the countdown Plug will switch your appliance off

Suitable for irons, small heaters, hair straighteners and soldering irons.  Simply push to set length of time you need (20, 40 or 60 mins)

When the minutes run out, the plug will beep then turn your appliance off, in case you forget

230V AC.   13A (3kW) resistive load.  2A Inductive