flame1

FLAME GUARD PRODUCTS

The FLAMEGUARD system is a means of installing mains downlighters with integral fire and acoustic properties. All of these products have been independently tested and approved to meet the requirements of BS 476 Pt21 1987 and BS EN ISO 140-3 1995 also BS EN ISO 140-6 1998. They satisfy all relevant sections of current Building Regulations including part B and C of the building regs. Forget about costly and difficult to install fire hoods. FLAMEGUARD downlights are all you need for a neat and safe lighting solution.

 

Fire tested to full 90 minute rating by chiltern international fire and approved to BS 476 Part 21 1987 with solid timber joists and also acoustically tested by the building test centre. With the nature of fire testing and the different sets of joists, do not take for granted that a downlighter tested in a solid timber constuction will maintain the same integrity within a construction using metal web or engineered 'I' beam joists. Flameguard has been fire tested in floor constructions with these types of modern joists and is compliant for both 30 minute and 60 minutes to BS EN 1365:2000.  Complies with Scottish Building regulations, sections 2, 3 and 5.

 

All FLAMEGUARD downlighters carry the 'F' Mark. Sutable for mounting into normally flammable material (eg Wood). Low Energy GU10 carries this mark when mounting into normally flammable material which may cover the downlighter. Complies with class 3 safety extra-low voltage (Selv) requirements of BS EN 60598

GU10 Fixed Flameguard Downlight

LL324
6 Rate = £6.25 12 Rate = £5.85 50 RATE = £5.32
LL321
Larger picture

FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Rim dia. 80mm  Cut-out. 65mm  Recess depth. 90mm.

 

Fixed Low Energy GU10 Flameguard Downlight

LL344-CF409
6 Rate = £14.01 12 Rate = £13.11 50 Rate = £12.67
LL344
Larger picture

This fitting is designed exclusively for use with the low energy compact fluorescent GU10 lamp supplied and cannot be used with standard GZ10/GU10 lamps.  It therefore satisfies the requirement of Part L of the 2006 Building Regulations in relation to the installation of energy efficient luminaries. .

 

Rim dia. 80mm  Cut-out. 65mm  Recess depth. 90mm.

 

Mains Professional Cast Recessed Reflector Flameguard Downlighter with moisture seal

LL439
6 Rate = £12.13 12 Rate = £11.35 50 Rate = £10.97
LL439
Larger picture

Designed to produce a broad beam of light by means of its extended reflector this fitting enables creative schemes to be produced utilising standard GU10 lamps.

 

Rim diameter. 105mm, Cut-out diameter. 92mm, Recess depth. 100mm.

Available in Plished brass, polished chrome, satin chrome, white, satin brass and antique brass

Mains Professional Cast Recessed Baffle Flameguard Downlighter with moisture seal

LL441
6 Rate = £11.66 12 Rate = £10.91 50 Rate = £10.54
LL441
Larger picture

The ‘baffle’ beam reducer in this unique fitting creates a tight beam light output enabling the designer to create some very interesting lighting effects and schemes

 

Rim diameter. 88mm, Cut-outdiameter. 70mm, Recess depth. 115mm

Available in Polished brass, polished chrome, satin chrome, white, satin brass and antique brass

GU10 Adjustable Flameguard Downlight

LL325
6 Rate = £6.67 12 Rate = £6.25 50 Rate = £6.04
LL322
Larger picture

All FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Rim Dia. 92mm.  Cut-out dia. 80mm.  Recess depth. 100mm.  Tilt. 15 degrees.

 

GU10 Adjustable Square Flameguard Downlight

LL30
6 Rate = £13.63 12 Rate = £12.76 50 Rate = £12.33
LL30
Larger picture

All FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Square 102mm.  Cut-out dia. 92mm.  Recess depth. 100mm.  Tilt. 20 degrees.

 

GU10 Eyeball Flameguard Downlight

LL326
6 Rate = £9.96 12 Rate = £9.13
LL323
Larger picture

All FLAMEGUARD downlighters supplied complete with 50w GU10 aluminium reflector lamp. Rim Dia. 114mm.  Cut-out dia. 98mm.  Recess depth. 95mm.  Tilt. 30 degrees.  Rotation. 355 degrees.

 

GU10 Eyeball Cast Flameguard Downlight

LL342
6 Rate = £14.39 12 Rate = £13.19
LL342
Larger picture

Small footprint eyeball cast downlight complete with moisture seal. 355 degree turn. Tilt 20 degrees. 

All FLAMEGUARD downlighters supplied complete with 50w GU10 aluminium reflector lamp. Rim dia: 102mm. Cut-out: 92mm. Recess depth:105mm

 

IP65 GU10 Flameguard Fitting c/w Lamp

LL20
6 Rate = £12.36 12 Rate = £11.57 50 Rate = £11.18
LL20
Larger picture

The IP65 rating of this fitting allows its use in Bathroom Zones 1 & 2 and the plated die cast bezels are used to not only provide an efficient seal against ingress of airborne particles, water or steam but also to furnish an attractive finish to the installation.

 

Rim dia. 88mm  Cut-out. 70mm  Recess depth. 115mm

LV Fixed Flameguard Downlight

LL321
6 Rate = £6.16 12 Rate = £5.76 50 rate = £5.57
LL321
Larger picture

All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim dia: 80mm. Cut-out: 65mm. Recess depth:80mm

 

LV Professional Cast Recessed Reflector Flameguard Downlighter with moisture seal

LL440
6 Rate = £13.00 12 Rate = £12.17 50 Rate = £11.76
LL439
Larger picture

Designed to produce a broad beam of light by means of its extended reflector this fitting enables creative schemes to be produced.

 

All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim diameter. 105mm, Cut-out diameter. 92mm, Recess depth. 95mm.

Available in Polished brass, polished chrome, satin chrome, white, satin brass and antique brass.

LV Professional Cast Recessed Baffle Flameguard Downlighter with moisture seal

LL442
6 Rate = £13.41 12 Rate = £12.56 50 Rate = £12.13
LL442
Larger picture

The ‘baffle’ beam reducer in this unique fitting creates a tight beam light output enabling the designer to create some very interesting lighting effects and schemes

 

All FLAMEGUARD downlights supplied with 50w low voltage aluminium reflector lamp. Rim diameter. 88mm, Cut-out diameter. 70mm, Recess depth. 100mm.

Available in Polished brass, polished chrome, satin chrome, white, satin brass and antique brass.

LV Adjustable Flameguard Downlight

LL322
6 Rate = £6.72 12 Rate = £6.29 50 rate = £6.08
LL322
Larger picture

All FLAMEGUARD downlighters supplied with 50w low voltage aluminium reflector lamp. Rim dia: 92mm. Cut-out: 80mm. Recess depth:90mm. Tilt. 15 degrees.

 

LV Adjustable Square Flameguard Downlight

LL133
6 Rate = £13.58 12 Rate = £12.72 50 rate = £12.28
LL133
Larger picture

All FLAMEGUARD downlighters supplied with 50w low voltage aluminium reflector lamp. Square: 102mm. Cut-out: 92mm. Recess depth:95mm. Tilt. 20 degrees.

 

LV Eyeball Flameguard Downlight

LL323
LL323

All FLAMEGUARD downlighters supplied with 50w low voltage aluminium reflector lamp. Rim dia: 110mm. Cut-out:98mm. Recess depth:85mm.  Tilt. 30 degrees. Rotation 355 degrees.

 

IP65 LV Flameguard Fitting c/w Lamp

LL41
6 Rate = £12.36 12 Rate = £11.57 15 Rate = £11.18
LL100
Larger picture

The IP65 rating of this fitting allows its use in Bathroom Zones 1 & 2 and the plated die cast bezels are used to not only provide an efficient seal against ingress of airborne particles, water or steam but also to furnish an attractive finish to the installation.

 

Rim dia. 88mm  Cut-out. 70mm  Recess depth. 110mm. 

 

Fire & Sound Protection Downlight Cover

LL467
LL467
Larger picture

        ·          Fully intumescent - swells to over 3 times its original thickness when exposed to fire, offering in excess of 60 minutes of protection.

·          Reinstates the acoustic protection of the ceiling.

·          Global assessment accreditation for all common ceiling types and joist constructions.

·           Easy to install from above and below the ceiling.

·          Multiple cable entry points.

·          Fully ventilated to avoid over-heating of the light fitting.

·          Self supporting and lightweight.

·          Reduces the amount of heat that escapes from a room through the light fitting.

·          Size: (HxDia.) 150x150mm.

Flameguard Insulation Support Boxes

LL48
LL48
Larger picture
 

Texecom Optical and Heat Multisensor Fire Detector

NS137
NS137

Combined Optical & heat multi-sensor with built-in 12V relay for 4-wire connection to security control panels. Heat enhancement ensures high sensitivity to fast burning fires whilst optical chamber provides exceptional false alarm immunity. Example Usage: optimum protection for fastest fire detection. Exodus OH/4W.  NB: rate of rise only is RR/4W

Texecom Fixed Heat Detector

NS152
NS137

Fixed 64°C heat detector with built-in 12V relay for 4-wire connection to security control panels. Suitable for use where smoke or dust is prevalent with superior false alarm immunity. Example Usage: bathrooms & kitchens. Exodus FT64/4W


"Distributors of Quality Electrical Products at Lowest Prices"